The Choice of Configuration of Buildings When Designing in Seismic Areas

  • Goncharova Natalya Ivanovna Candidate of Technical Sciences, Associate Professor, Department of Construction of Buildings and Structures, Fergana Polytechnic Institute, Fergana, Republic of Uzbekistan
  • Abobakirova Zebuniso Asrorovna PhD, Associate Professor, Department of Construction of Buildings and Structures, Fergana Polytechnic Institute, Fergana, Republic of Uzbekistan
  • Mukhamedzyanov Aleksandr Ravilovich Assistant, Department of Architecture, Fergana Polytechnic Institute, Fergana, Republic of Uzbekistan
Keywords: seismic resistance of buildings and structures, configuration in terms of load-bearing elements, closed configuration, examples of building configuration, correct choice of configuration

Abstract

The article deals with the issues of ensuring the seismic resistance of buildings and structures based on the choice of optimal schemes for the relative position of the bearing elements in the plan.

References

1. КМК 2.01.03-96 Строительство в сейсмических районах. Ташкент, 1996 г.
2. М.Мартемьянов. Проектирование и строительства в сейсмических районах. М.: Стройиздат, 1985. -220 с.
3. Muminjon, N., & Dilshodjonugli, N. S. (2020). Improvement of transformer protection elements. Academicia: An International Multidisciplinary Research Journal, 10(6), 394-398.
4. Muminjon, N., & Valievichmaster, R. F. (2021). The availability of natural gas and the cost of building power plants. Academicia: An International Multidisciplinary Research Journal, 11(3), 1769-1771.
5. Раззаков, С. Ж., Абдуллаев, И. Н., & Рахманов, Б. К. (2020). Составные компоненты деформирования и разрушения синтетических тканых лент для грузозахватных приспособлений в строительстве.
6. Abdullaev, I. N., Akhmedov, Z. D., Rakhmanov, B. K., & Zhurabaeva, R. T. (2020). State and prospects of production and operation of synthetic woven belts (table) for load-handling devices (hd) in the republic of Uzbekistan. Journal of Tashkent Institute of Railway Engineers, 16(4), 106-109.
7. Абдуллаев, И. Н., Ахмедов, Ж. Д., & Рахманов, Б. К. (2020). Исследование проблем применения синтетических тканых лент в Узбекистане. In Наука и инновации в строительстве (pp. 202-207).
8. Абдуллаев, И. Н., & Рахманов, Б. К. (2019). Распределение монтажных элементов зданий по массе для подбора грузозахватных синтетических строп в строительстве. In Наука и инновации в строительстве (pp. 188-192).
9. Goncharova, N. I., Abоbakirova, Z. A., & Kimsanov, Z. (2019). Technological Features of Magnetic Activation of Cement Paste" Advanced Research in Science. Engineering and Technology, 6(5).
10. Кимсанов, З. О. О., Гончарова, Н. И., & Абобакирова, З. А. (2019). Изучение технологических факторов магнитной активации цементного теста. Молодой ученый, (23), 105-106.
11. Abdullayev, I., & Umirzakov, Z. (2020). Optimization of bag filter designs (on the example of cement plants in the fergana region of the republic of Uzbekistan). Збірник наукових праць ΛΌГOΣ, 31-34.
12. Goncharova, N. I., Abobakirova, Z. A., & Mukhamedzanov, A. R. (2020, October). Capillary permeability of concrete in salt media in dry hot climate. In AIP Conference Proceedings (Vol. 2281, No. 1, p. 020028). AIP Publishing LLC.
13. Каратаев, Г. И., Марков, А. Р., Синяшина, Л. Н., Миллер, Г. Г., Клицунова, Н. В., Титова, И. В., ... & Амелина, И. П. (2008). Сравнительное изучение роли yada, inva И рsaл-генов в патогенности yersinia pseudotuberculosis. Молекулярная генетика, микробиология и вирусология, (4), 10-18.
14. Ivanovna, G. N., & Asrorovna, A. Z. (2019). Technological features ofmagnetic activation of cement paste. European science review, 1(1-2).
15. Гончарова, Н. И., Зикиров, М. С., & Кимсанов, З. О. О. (2019). Актуальные задачи проектирования общественных и жилых комплексов в центре Ферганы. Молодой ученый, (25), 159-161.
16. Гончарова, Н. И., Мадаминов, Н. М., & Кимсанов, З. О. О. (2019). Raw architecture of the people's housing of Uzbekistan. Молодой ученый, (26), 104-107.
17. Goncharova, N. I., Raxmanov, B. K., Mirzaev, B. K., & Xusainovа, F. O. (2018). Properties of concrete with polymer additives-wastes products. Scientific-technical journal, 1(2), 149-152.
18. Гончарова, Н. И., Абобакирова, З. А., Абдурахмонов, Д. М., & Хазраткулов, У. У. (2016). Разработка солестойкого бетона для конструкций с большим модулем открытой поверхности. Молодой ученый, (7-2), 53-57.
19. Бахромов, М. М., & Рахмонов, У. Ж. (2019). Дефекты при проектировании и строительстве оснований и фундаментов. Проблемы современной науки и образования, (3 (136)).
20. Абдуллаев, И. Н., Юнусалиев, Э. М., & Рахманов, Б. К. (2020). Вопросы жилищно-гражданского строительства в ферганской долине. In Наука и инновации в строительстве (pp. 207-215).
21. Бахромов, М. М., Отакулов, Б. А., & Рахимов, Э. Х. У. (2019). Определение сил негативного трения при оттаивании околосвайного грунта. European science, (1 (43)).
22. Goncharova, N. I., & Abobakirova, Z. A. (2021). Reception mixed knitting with microadditive and gelpolimer the additive. Scientific-technical journal, 4(2), 87-91.
23. Goncharova, N. I., & Turopov, M. (2019). Optimization of the structure of cement concrete with activated liquid medium. Scientific-technical journal, 22(3), 60-64.
24. Abdullayev, I. N., & Marupov, A. A. (2020). Analysis of land in protected areas of high-voltage power lines (transmission lines) on the example of the Fergana region. Scientific Bulletin of Namangan State University, 2(4), 107-114.
25. Бахромов, М. М., Рахмонов, У. Ж., & Отабоев, А. Б. У. (2019). Воздействие сил негативного трения на сваю при просадке грунтов. Проблемы современной науки и образования, (12-2 (145)).
26. Гончарова, Н. И., Абобакирова, З. А., & Мухамедзянов, А. Р. (2020). Энергосбережение в технологии ограждающих конструкций. In Энерго-ресурсосберегающие технологии и оборудование в дорожной и строительной отраслях (pp. 107-112).
27. Бахромов, М. М., & Рахмонов, У. Ж. (2019). Закономерности воздействия сил негативного трения по боковой поверхности сваи. Проблемы современной науки и образования, (12-2 (145)).
28. Axmedov, T. (2021). Gotika uslubining arxitekturadagi ahamiyati. Scientific progress, 2(6), 1305-1310.
29. Mahkamov, Y. M., & Mirzababaeva, S. M. (2020). Strength of bending reinforced concrete elements under action of transverse forces under influence of high temperatures. Academicia: An International Multidisciplinary Research Journal, 10(5), 618-624.
30. Tolqin, A. (2021). Ancient greek and ancient rome architecture and urban planning. The American Journal of Engineering and Technology, 3(06), 82-87.
31. Махкамов, Й. М., & Мирзабабаева, С. М. (2019). Температурные прогибы железобетонных балок в условиях воздействия технологических температур. Проблемы современной науки и образования, (11-1 (144)).
32. Бахромов, М. М., & Раҳманов, У. Ж. (2020). Проблемы строительства на просадочных лессовых и слабых грунтах и их решение. Интернаука, (37-1), 5-7.
33. Abobakirova, Z. A. (2021). Regulation Of The Resistance Of Cement Concrete With Polymer Additive And Activated Liquid Medium. The American Journal of Applied sciences, 3(04), 172-177.
34. Abobakirova, Z. A. (2021). Reasonable design of cement compositionfor refactory concrete. Asian Journal of Multidimensional Research, 10(9), 556-563.
35. Mirzaakhmedova, U. A. (2021). Inspection of concrete in reinforced concrete elements. Asian Journal of Multidimensional Research, 10(9), 621-628.
36. Asrorovna, A. Z. (2021). Effects Of A Dry Hot Climate And Salt Aggression On The Permeability Of Concrete. The American Journal of Engineering and Technology, 3(06), 6-10.
37. Umarov, S. A. (2021). Development of deformations in the reinforcement of beams with composite reinforcement. Asian Journal of Multidimensional Research, 10(9), 511-517.
38. Nabiev, M., GM, G. S. Q., & Sadirov, B. T. (2021). Reception of improving the microclimate in the houses of the fergana valley. The American Journal.
39. Djurayevna, T. N. (2020). Influence Of Surface Additives On Strength Indicators Of Cement Systems. The American Journal of Applied sciences, 2(12), 81-85.
40. Ogli, X. A. M. (2021). Construction Of Flexible Concrete Elements In Buildings. The American Journal of Engineering and Technology, 3(06), 101-105.
41. Djurayevna, T. N. (2020). Building Materials Determined In The Architectural Monuments Of Central Asia. The American Journal of Applied sciences, 2(12), 77-80.
42. Ashurov, M., Sadirov, B. T., Xaydarov, A. M., Ganiyev, A. A., Sodikhonov, S. S., & Khaydarova Kh, Q. (2021). Prospects for the use of polymer composite fittings in building structures in the republic of Uzbekistan. The American Journal.
43. Usmonov, Q. T., & Xaydarov, A. M. (2021). Yirik shaharlarda turar-joy maskanlari uchun xududlarni muhandislik tayyorgarlik va obodonlashtirish ishlarini amalga oshirish yo ‘llari. Scientific progress, 2(6), 1297-1304.
44. Ogli, X. A. M. Development of effective cement additives for the production of heat-resistant concrete based on technogenic waste" International Journal of Researchculture Society. India (2019. 12. 12).
45. Davlyatov, S. M., & Makhsudov, B. A. (2020). Technologies for producing high-strength gypsum from gypsum-containing wastes of sulfur production-flotation tailings. Academicia: An International Multidisciplinary Research Journal, 10(10), 724-728.
Published
2021-11-30
How to Cite
Ivanovna, G. N., Asrorovna, A. Z., & Ravilovich, M. A. (2021). The Choice of Configuration of Buildings When Designing in Seismic Areas. CENTRAL ASIAN JOURNAL OF ARTS AND DESIGN, 2(11), 32-39. Retrieved from https://cajad.centralasianstudies.org/index.php/CAJAD/article/view/73
Section
Articles